RigLit
Test build · 16 Oct 2026 · for invited testers

Download RigLit

Windows 10 and 11, 64-bit. The phone app pairs with your PC and controls the lights from anywhere. This tester build has every Pro feature switched on (phone and watch control, Smart Auto, Game mode, every pump-screen face). No key needed.

Download for Windows Phone app

RigLit Setup · about 145 MB · installs as "RigLit" and updates itself. Need an earlier one? All builds.

1. On the PC

  1. Install OpenRGB first (free, Windows 64-bit). Open it once, then close it. RigLit uses it for the motherboard, graphics card and memory; Corsair, Lian Li and the keyboard are driven by RigLit directly.
  2. Run RigLit-Setup.exe. If a blue window says "Windows protected your PC", click More info, check the name is RigLit, then Run anyway. The installer is not code-signed yet, so Windows warns about it the way it warns about every unsigned app.
  3. Open RigLit, go to Settings and press Set up (it sits above Advanced once OpenRGB is installed; if you do not see it, open Advanced, the OpenRGB controls are inside). One administrator prompt appears; answer Yes. After this RigLit starts OpenRGB on its own, without asking again.
  4. In Settings → Advanced, keep Start OpenRGB when this app opens on. Devices are found on their own; there is no scan button. The Devices page lists them once OpenRGB is up.
  5. Close RigLit and open it again. Within about 20 seconds the lights follow the app. Pick a scene on the Scenes page.

If Settings says OpenRGB was not found, press Locate… and choose C:\Program Files\OpenRGB\OpenRGB.exe.

Armoury Crate, iCUE, SignalRGB and L-Connect fight for the same devices. RigLit closes them on start when it can; if a light stays stuck, close that app yourself.

2. The phone app

  • Android: the Android build is being updated for the new pairing; the link appears here as soon as it is ready.
  • iPhone and Apple Watch: through TestFlight. Ask Karan for the invite, install TestFlight from the App Store, accept the invite and install RigLit. The watch app comes along: open the Watch app on the iPhone and install RigLit on the watch.

3. Pair the phone with the PC

  1. PC: Settings → RigLit remote card → Generate key → turn the switch on (Control from your phone and watch (anywhere)) → Show pairing QR.
  2. Phone: open RigLit → Scan QR code → point it at the PC screen. The phone shows a 6-digit code.
  3. PC: a box says A phone wants to pair. Type the 6 digits from the phone. One try only; a wrong code stops pairing and you scan again.
  4. Phone: tap Done. The PC shows Phone paired. From now on the phone changes scenes, brightness, play/pause, eco, fan mode and game mode from anywhere with internet.

After 15 minutes with no command, the first one takes 30 to 50 seconds while the relay wakes up. Then it is instant again.

Something wrong?

RigLit sends Team RigLit a report by itself when setup goes wrong (you can switch this off in Settings). For anything else, open Home → Feedback → Send to Team RigLit; the app log goes with it.

If the app will not open at all, press Windows + R, paste %APPDATA%\riglit\riglit.log, press Enter, and send that file to Karan.